Loading... Please wait...

Our Newsletter


  • Image 1
  • Image 2
  • Image 3
  • Image 4
$50.00 (Fixed shipping cost)

Sorry but this item is currently unavailable.

Please check back at a later stage.

Product Description

BioMed Certified
Spore Tested
Performance Data Provided

M7 SpeedClave Features: 

Safety Door 
The safety door on this autoclave automatically seals when pressurized and will not allow the operator to open the door until the chamber is safely depressurized. 

Temperature Regulator 
The temperature regulator allows the operator to preset the temperature at a desired setting between 250º F (121º C) and 270º F (132º C). This control, acting as a thermostat, cycles the heating element on and off. 

Temperature Gauge 
The temperature gauge indicates the temperature inside the chamber. The gauge is graduated in two-degree increments from 80º F (26.7º C) to 270º F (132º C). 

Low Water Cut-out Switch 
The low water cut-out switch prevents “dry burning”. The M7 autoclave will operate only when there is enough water present, which prolongs the life of the heating element. A pilot light is on when the heater is on and cycles on and off during normal operation. 

Cycle Timer 
The cycle timer regulates sterilization time from 0 to 30 minutes and automatically turns the M7 off when the sterilization cycle is complete. This prevents over-sterilization thus extending the service life of your instruments. 

Front Draining Feature 
With our front draining feature, it's easy to clean and maintain. All controls and information are on the front and easily accessible to the operator. 


Use on laminate, stainless steel or stone surfaces. Allow 2.5" (6.4 cm) on sides and rear and 12" (30.5 cm) above, to allow space to fill the reservoir and for cooling processed trays. 


Overall length: 18.12" (46 cm) 
Overall width: 13.56" (34.4 cm) 
Overall height: 12.81" (32.5 cm) 
Countertop area: Minimum depth 16.5" (41.9 cm) 
Chamber: 7.5" diameter (19.1 cm) - 15" depth (38.1 cm) - 2.4 gal. usable volume (9.0 liters) 
Unit weight: 30 lbs. (13.6 kg) 
Water reservoir capacity: 1.31 gal. (4.9 liters) 
Electrical Requirements: 120 VAC, 60 Hz, 10 AMPS Single Phase - 120 VAC has 1136 watt tubular immersion heater UL and CUL Listed - CSA Certified - 220-240 VAC, 50 Hz, 5 AMPS - 100 VAC, 60 Hz, 12 AMPS
BioMed Certified
Spore Tested
Performance Data Provided

Find Similar Products by Category

Add to Wish List

Click the button below to add the RITTER M7 SPEEDCLAVE AUTOCLAVE to your wish list.

You Recently Viewed...